Datalogic QuickScan Lite Imager, Black, USB Interface w/ USB Cable

HIGHLIGHTS

  • Handheld bar code reader Black
  • Sensor type: Laser
  • EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
  • Tilt reading angle: -45 - 45°
  • Wired Standard interfaces: USB
  • Power source type: DC

Datalogic QuickScan Lite Imager, Black, USB Interface w/ USB Cable

469,00kr. Ekskl. moms.

QuickScan Lite Imager, USB Interface w/ USB Cable, Black

Artikelnr: QW2120-BKK1 Varumärke:
Delfi SKU: 7406189

Stock visibility Not in stock

Beskrivning

Datalogic QuickScan Lite QW2100. Type: Handheld bar code reader, Sensor type: Laser, Linear (1D) barcodes supported: EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128). Connectivity technology: Wired, Standard interfaces: USB. Product colour: Black, International Protection (IP) code: IP42. Power source type: DC, Input voltage: 5 V, Power consumption: 340 mA. Weight: 119 g, Width: 170 mm, Depth: 65 mm

The QuickScan™ reader series is Datalogic ADC’s value line of general purpose handheld data collection products. The QuickScan Lite QW2100 linear imager is an entry level product created specifically for reading long and truncated bar codes which is common in some areas of the world. It is perfect for use in retail, light manufacturing, document/bill processing and banking/finance environments.

The QW2100 imager is small, lightweight and its ergonomic design is comfortable to use during daily operations. It offers snappy reading performance on most 1D bar codes and features a wide scanning angle with an extended scanning line which is perfect for capturing longer and wider bar codes typically found on utility bills and used by manufacturers of electronic parts. Additionally, the scanning line is thinner and brighter, allowing users to scan at wide angles without having to increase the scanning distance.

A specially designed stand has been created for the QW2100 imager which is light in weight, collapsible to use as a holder instead of a stand, and also has a ‘tiltable head’ for various angle settings.

The QW2100 imager is available with two interface options: USB or Keyboard Wedge / RS-232 and includes various packaging options so that it can be ordered as a scanner only or as a kit equipped with a scanner, cable and stand to facilitate hands-free reading options. The Datalogic Aladdin™ configuration software provides user-friendly features that simplify the start-up procedure, even for inexperienced users.

Because this imager was created for specific areas of the world, please check with your Datalogic Representative to inquire if the QW2100 imager is available in your area.

Features
– Wide scan angle
– Laser-like thinner and extended scan line
– Datalogic’s patented ‘Green Spot’ technology for good-read feedback
– Water and Particulate Sealing Rating: IP42
– Drop Resistance to 1.5 m / 5.0 ft
– Uses the same cables and power supplies as the current QuickScan products
– Bulk packaging available (10 scanners per box)
– USB Certified Kits available

3 Years

Ytterligare information

Type

Handheld bar code reader

Sensor type

Laser

Tilt reading angle

-45 – 45°

Pitch reading angle

-65 – 65°

Yaw reading angle

-70 – 70°

Connectivity technology

Wired

Standard interfaces

USB

Product colour
Power source type

DC

Input voltage

5 V

Power consumption

340 mA

Weight

119 g

Width

170 mm

Depth

65 mm

Height

70 mm

Cables included

USB

Operating temperature (T-T)

0 – 50 °C

Storage temperature (T-T)

-40 – 70 °C

Operating relative humidity (H-H)

5 – 95%

Harmonized System (HS) code

84716070

2D (matrix & stacked) barcodes supported

Not supported

Wavelength

650 nm

International Protection (IP) code

IP42

Linear (1D) barcodes supported

EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)

Read rate (max)

400 reads/s

SE ANDRA KATEGORIER

Etikettskrivare i toppklass

Vara den snabbaste skannern i lagerlokalen

Datalogic QuickScan hjälper dig.